Torque Calculators & Tools

Free torque calculations from STAND Tools, a torque wrench manufacturer in Taiwan.

Choose a tool

Torque wrench extension calculator

A visual torque wrench extension calculator for crowfoot adapters, torque adapters, angles and unit conversions.

Crowfoot torque calculator

Calculate the correct torque wrench setting for a crowfoot extension, including angled installations and common units.

Torque adapter calculator

Torque adapter calculator for dog-bone and inline torque wrench adapters with full 0 to 180 degree support.

Torque unit converter

Convert torque between N·m, kgf·m, kgf·cm, lbf·ft and lbf·in, with meaningful handle-force comparisons.

Correct for the effective lever arm

Torque wrench and 45-degree adapter: L runs from grip centre to drive centre; E runs from drive to fastener; E cos θ projects forward, giving an effective arm of L + E cos θ.
Top view: a generic wrench with an adapter at 45°. Measure between the marked centres. Schematic only; no product dimensions are shown.

Only the extension’s projection along the wrench axis, E × cos θ, changes the effective arm. Add it to L. Apply force perpendicular to the wrench at the centre of your grip.

T_set = T_target × L / (L + E × cos θ)

T_target
Target torque required at the fastener.
T_set
Torque to set or read on the wrench.
L
Effective wrench length: drive centre to the centre of your grip, not the overall wrench length.
E
Extension length: drive centre to the centre of the fastener.
θ
Angle between the extension and wrench centre lines: 0° points forward, 90° is perpendicular and 180° folds back.

A socket extension along the drive axis does not change the lever arm and needs no correction. This formula applies to extensions that lengthen or shorten the effective lever arm, such as crowfoot heads and torque adapters.

At 90°, the extension adds no effective length and no correction is needed. At 0°, the forward extension reduces the required wrench setting; at 180°, the setting increases.

Measure L and E in the same length unit. Check that the corrected setting stays within the wrench range and follow the fastener and wrench manufacturers' instructions.

  • 86 N·m target, L = 250 mm, E = 25 mm, θ = 0° → 78.18 N·m wrench setting.
  • 100 N·m target, L = 450 mm, E = 60 mm, θ = 0° → 88.24 N·m wrench setting.

Talk to our torque specialists

Tell us your application, torque range and drive size — we will recommend the right model.