How are Type II setting torque tools classified into Classes A–G?

Applies to: ISO 6789:2003, ISO 6789-1:2017 · Updated 2026-11-17

Technical review: Alston Hsiao (Chieh-Jen Hsiao), CTO, STAND

Key answer

First separate adjustable tools from fixed-adjustment tools, then check whether there is a setting scale and whether the tool is a wrench or a screwdriver; adjustable, graduated flexion bar wrenches are listed separately as Class G. Non-graduated does not mean fixed adjustment. The key to telling the two apart is whether the tool is designed to be adjusted by the user.

Cross-identify by the setting method

The following assumes the tool has already been confirmed as a Type II setting torque tool. Classes A–G correspond in the same way in the 2003 edition and in ISO 6789-1:2017. The table places each matching wrench and screwdriver pair side by side for easier identification.

Setting method to confirm firstWrenchScrewdriver
User-adjustable, with a scale or display to help set the torqueII-A; graduated flexion bar wrenches are covered separately by II-GII-D
User-adjustable, no setting scale; adjusted with the aid of measuring equipmentII-CII-F
Fixed adjustment, not designed to be adjusted by the userII-BII-E
Flexion bar, adjustable, graduatedII-GThis row is not used to classify screwdrivers

II-A means Type II, Class A, and so on for the others. For a setting tool with a display, confirm that the display helps set the torque. Do not reclassify the tool as an indicating type merely because a number is visible.

For non-graduated tools, also ask whether the user can adjust them

Suppose two setting wrenches both have no scale. One is designed to let the user adjust it to the required torque with the aid of measuring equipment; the other provides only a single fixed setting. The first points to II-C and the second to II-B. The difference comes from purpose and design, not simply from whether there is an adjustment hole.

The same applies to screwdrivers: an adjustable non-graduated screwdriver is II-F, and a fixed-adjustment one is II-E. Fixed adjustment means not designed to be adjusted by the user; it should not be stretched to mean that no service technician could ever change it under any circumstances. If a catalog says only “preset,” you should still ask whether the user can reset it or whether it is intended for use at a fixed value.

For adjustable non-graduated tools, the 2003 edition refers to a “calibration device,” while ISO 6789-1:2017 refers to a “torque measurement system.” In either case, confirm that suitable equipment is used for the adjustment rather than guessing the set value from the position of a knob.

A flexion bar tool can also be a setting tool

When you see a flexion bar mechanism, first look at how it works. Type II Class G is an adjustable, graduated flexion bar setting wrench, whereas Type I Class A is the torsion bar or flexion bar wrench in the indicating classification. The two cannot be merged just because both are called “flexion bar.”

In practice, ask the manufacturer to confirm the setting method, the tool form, and the action when the set torque is reached, then record the complete Type/Class. The classification helps you find the requirements that follow; on its own, it does not prove that the tool has passed conformance testing, and tools do not share the same purpose simply because they share a letter.